Screw (expeller) oil press — oil mill equipment
2026 Front-Discharge Screw Press
Redesigned front oil-outlet layout for easier collection. Built for export.
A 2026 redesign that moves the oil outlet to the front of the machine. It sounds minor until you have collected oil from a rear outlet for a shift: front discharge means the operator sees the flow, and the collection vessel is reachable without moving the press.
At a glance
What this machine is, and who buys it
| Machine type | Screw (expeller) oil press |
| Built for | Screw expeller · Front discharge · Export model |
| Typical buyer | Export buyers and operators who collect oil by hand rather than by pipe. |
| Pressing principle | A screw press turns a feed screw against a heated barrel, so seed is crushed and squeezed continuously as it travels. Oil leaves through slots along the barrel and the cake leaves the far end, which means one operator can keep it running all day. |
| Throughput | Processes about 15 kg of material per hour |
| Motor | 0.75 kW |
| Dimensions | 500 × 300 × 780 mm (L × W × H) |
| Shipping weight | 55 kg packed |
| Screw diameter | 45 mm |
| Stated oil yield | Peanut 42%, Sesame 45% |
| Residual oil in cake | about 3% |
The 2026 frame is built by the partner workshop to a revised layout, and the output figures here are their measurements, not ours. For the redesigned machine you order, the quotation carries those figures in writing.
Before you order
What to check on the new layout before ordering
A redesign that moves the oil outlet changes how the machine sits in your workspace. The three checks below cover that, plus the export paperwork question that most often delays shipments of this model.
- Whether the front outlet suits your bench or plinth layout.
- That the redesign has not reduced cake-discharge clearance.
- Which certification documents can accompany an export shipment.
Alternatives
Other screw presses in the range
If this frame is the wrong size or the wrong specification, these are the nearest machines doing the same job.
Stainless-Body Dual-Mode Screw Press
Stainless housing, cold and hot pressing, sized for walnut oil and small commercial runs.
Smart Automatic Oil Press
Electric automatic press with cold/hot modes for small and mid-size sesame oil work.
Compact Mobile Cold Press
Small automatic cold press for peanut and soybean, popular for markets and fairs.
Related equipment
How the front-discharge redesign relates to the range
Tell us what you press, and we will confirm the specification
Send the seed you press, your bench or plinth dimensions, the voltage and plug type, and the destination port. What comes back is the workshop’s confirmed figures for the 2026 frame, the certificates available for export, and a plain comment if the standard layout would suit your floor better.