Screw (expeller) oil press — oil mill equipment
Automatic Screw Press with Integrated Roaster
Roasting and pressing in one unit — built for market stalls and export buyers. The supplier lists this machine in 2 listing variants; they differ in frame size or packaging rather than in principle.
Roaster and press share one chassis, so seed goes from raw to pressed without being moved between machines. That matters at a market stall, where the roasting smell is part of the sale and there is no room for two separate units.
At a glance
What this machine is, and who buys it
| Machine type | Screw (expeller) oil press |
| Built for | Screw expeller · Roast + press · Export model |
| Typical buyer | Market stalls, retail oil counters and export buyers wanting one-unit installation. |
| Pressing principle | A screw press turns a feed screw against a heated barrel, so seed is crushed and squeezed continuously as it travels. Oil leaves through slots along the barrel and the cake leaves the far end, which means one operator can keep it running all day. |
| Throughput | Processes about 25 kg of material per hour |
| Motor | 1.5 kW |
| Dimensions | 1120 × 820 × 1380 mm (L × W × H) |
| Shipping weight | 230 kg packed |
| Stated oil yield | Sesame 45% |
| Supplier model designation | Vertical frame, size 56 |
Every figure on this page traces back to the partner workshop’s listings, with units normalised to metric. The roaster-press combination is assembled by them, not by us — so on the quotation, each number for the variant you pick is stated in writing.
Before you order
Three checks before this unit goes on your stall
A combined roaster and press doubles the things that can be wrong at delivery. The checks below catch the expensive ones — and they are the disputes we see most often on this model.
- Roaster capacity against press throughput — the two should be matched, not just bolted together.
- Extraction or flue arrangement for the roaster if the stall is indoors.
- Whether roasting and pressing can run at the same time or only in sequence.
Alternatives
Other screw presses in the range
If this frame is the wrong size or the wrong specification, these are the nearest machines doing the same job.
Dual-Mode Screw Press, Cold & Hot
Presses a wide range of oilseeds; switches between cold and hot pressing for peanut and sesame.
Multi-Purpose Oil Mill Screw Press
Automatic screw press handling peanut, rapeseed and walnut on one machine.
Multi-Function Mobile Screw Press
Large multi-function screw press for mobile and market-stall sesame oil pressing.
Related equipment
Where the roaster-press combination sits in the catalogue
Tell us what you press, and we will confirm the specification
Send the seed you roast and press, your busiest-day volume, whether the stall is indoors or open-air, the voltage available, and the destination port. You get the workshop’s confirmed figures for the variant quoted, plus a straight opinion on whether the roaster and press belong in one chassis for your setup.