Screw (expeller) oil press — oil mill equipment
Heavy-Duty Commercial Screw Oil Press
Large-frame screw expeller for peanut and flaxseed, built for continuous oil-mill duty.
This is the largest single-machine screw press in the range: a heavy welded frame carrying an oversized gearbox, sized so the barrel can run all day without heat soak. It is bought for peanut and flaxseed work where the mill presses the same seed for hours rather than switching material every batch.
At a glance
What this machine is, and who buys it
| Machine type | Screw (expeller) oil press |
| Built for | Screw expeller · Large capacity · Factory direct |
| Typical buyer | Village oil mills and contract pressers running one seed continuously. |
| Pressing principle | A screw press turns a feed screw against a heated barrel, so seed is crushed and squeezed continuously as it travels. Oil leaves through slots along the barrel and the cake leaves the far end, which means one operator can keep it running all day. |
| Throughput | Processes about 35 kg of material per hour |
| Motor | 4 kW |
| Dimensions | 1100 × 850 × 1270 mm (L × W × H) |
| Shipping weight | 260 kg packed |
| Stated oil yield | Peanut 45% |
| Supplier model designation | Vertical frame, size 60 |
Figures above are the partner workshop’s own published values, converted to metric units. This machine is built in a partner workshop rather than on our own line, so we confirm every figure in writing on quotation for the exact frame you order.
Before you order
What to check on this machine
Three things worth settling on this particular model before money changes hands. They are the points that most often turn into a complaint after delivery.
- Floor loading and a three-phase supply — a frame this size is not a bench machine.
- Cake discharge clearance, since the residue leaves continuously and needs a bin under it.
- Whether the gearbox ratio is set for oil-bearing seed or for high-fibre material.
Alternatives
Other screw presses in the range
If this frame is the wrong size or the wrong specification, these are the nearest machines doing the same job.
Multi-Purpose Oil Mill Screw Press
Automatic screw press handling peanut, rapeseed and walnut on one machine.
Automatic Screw Press with Integrated Roaster
Roasting and pressing in one unit — built for market stalls and export buyers.
Dual-Mode Screw Press, Cold & Hot
Presses a wide range of oilseeds; switches between cold and hot pressing for peanut and sesame.
Related equipment
Where this machine sits in the wider catalogue
Tell us what you press, and we will confirm the specification
Send the seed type, how much you press per day, your local voltage and plug type, the destination country, and whether you need cold pressing, hot pressing or both. We will come back with the confirmed figures for this machine and say plainly if a different one suits you better.