KHOP small sesame press
KHOP-10KG automatic hydraulic press for compact retail production
The KHOP-10KG is the source page’s small-batch model for sesame oil production and customer-facing shop use. It is positioned for sesame oil shops, supermarkets, farmers markets, and grain and oil stores that want an automatic hydraulic process in a compact layout.
Technical specification
Source-listed KHOP-10KG machine data
The 24-hour capacity is retained as a source-page reference. Confirm the working schedule, sesame preparation, local power supply, and final configuration before using it for production planning.
| Item | Listed value | Buyer check |
|---|---|---|
| Model | KHOP-10KG | Use this exact designation on the quotation and supply list. |
| Machine size | 950 × 850 × 1550 mm | Check door access, service clearance, and the final shop position. |
| Weight | 1000 kg | Confirm floor loading and unloading arrangements. |
| Voltage | 380V / 220V | Confirm which voltage, phase, and frequency apply to the supplied machine. |
| Power | 1.5 kW | Include the machine in the shop’s electrical load plan. |
| Capacity | 1.0 ton / 24 hours | Source-page reference value; verify operating assumptions and achievable schedule. |
| Operation type | Automatic hydraulic press | Confirm controls, operating instructions, and commissioning scope. |
Application fit
Sesame first, with other high-oil kernels subject to confirmation
The model page repeatedly identifies sesame as the primary application. It also lists several other materials, but those should be confirmed against the exact seed condition and a representative sample.
Recommended material
Small-batch sesame oil production
Sesame is the recommended material and the main basis for the shop-oriented positioning of this model.
- Suitable for sesame oil shops and fresh-oil retail
- Visible pressing and oil flow can support a customer-facing process
- Automatic hydraulic operation reduces reliance on manual pressing
- Compact layout suits a planned shop installation
Source-listed for evaluation
Walnut, tea seed, peeled pine nut, and almond
These materials appear on the current KHOP-10KG page, while sesame remains the stated optimization target.
- Share the exact raw material and kernel condition
- Confirm whether shelling, cleaning, drying, or roasting is required
- Run sample-based confirmation before commercial sizing
- Use an industrial press route for broader multi-seed or heavy-duty production
Working principle
A batch moves from the pressing chamber to clean oil collection
The source page describes a direct hydraulic sequence. Raw-material preparation should be defined separately around the chosen sesame product.
Machine structure
Three systems identified on the KHOP-10KG source page
Use these component groups to check the quotation, documentation, and service scope.
Main body
Base plate, columns, pressing chamber, and oil collection tray form the working structure where the material is pressed and oil is received.
Hydraulic system
Gear pump, high-pressure pump, hydraulic cylinder, and control valves provide and regulate the pressing pressure.
Electrical controls
Motor, temperature controller, pressure gauge, and power system support automatic operation and process monitoring.
Equipment and material views
Review the KHOP-10KG source-page machine media
Start with the Korean-style sesame production-line video, then use the model photos to inspect the machine format. Sesame remains the primary recommendation.
6:39 process video
See the shared Korean-style sesame pressing workflow
This video is used across the KHOP-10KG, KHOP-15KG, and KHOP-20KG pages to show the production-line sequence. Use the KHOP-10KG table above for this model’s published size, weight, power, and capacity references.
- The video demonstrates the common workflow, not three identical model outputs.
- Confirm the KHOP-10KG batch basis, utilities, and acceptance test separately.
Buyer configuration checklist
Check the installation and supply scope before ordering
- Sesame variety, seed condition, and representative sample
- Daily input target and planned operating hours
- Required oil profile and upstream cleaning or roasting route
- Available shop area, door width, service clearance, and floor loading
- Required 380V or 220V configuration, plus local phase and frequency
- Oil collection vessel and clean storage arrangement
- Cake removal, handling, and cleaning procedure
- Operator instructions and commissioning requirement
- Written list of included tools, consumables, and recommended spare or wear parts
- Destination country and unloading plan for the listed machine weight
Treat the 24-hour capacity as a reference
The live page lists 1.0 ton per 24 hours. Actual scheduling depends on the raw material, preparation, loading practice, cycle time, cleaning, operator routine, and downtime.
The page does not define a standard accessory or spare-parts package, so request an itemized supply list with the quotation.
Related planning pages
Continue from model selection to process definition
Confirm the KHOP-10KG against the actual shop conditions
Send the sesame type, daily input, work schedule, shop dimensions, local electrical supply, upstream preparation, oil collection plan, destination, and required supply scope.